MS mirror sheet is widely used in architectural decoration, furniture manufacturing and industrial equipment due to its high gloss and flatness. However, in daily use, MS mirror sheet is easily affected by scratches or oxidation, which affects its aesthetics and service life. The following are specific methods and suggestions to prevent MS mirror sheet from being scratched or oxidized:

Measures to prevent scratches
Surface protection
Use protective film: During transportation and installation, apply a special protective film to the MS mirror sheet to prevent the surface from being scratched or contacting hard objects.
Avoid direct contact with sharp objects: In daily use, avoid placing keys, knives or other sharp objects on the surface of the mirror sheet.
Proper cleaning
Use soft cleaning tools: Choose soft cloths (such as microfiber cloths) for cleaning, and avoid using rough rags or steel wool to avoid scratching the surface.
Choose a mild detergent: Use a neutral detergent (such as soapy water or a special metal cleaner), and avoid acidic or alkaline detergents as they may corrode the surface.
Reduce friction
Install non-slip mats: If the MS mirror panel is used as a tabletop or countertop, you can place non-slip mats or tablecloths on it to reduce the friction of objects on the surface when moving.
Avoid dragging heavy objects: When moving heavy objects on the surface of the MS mirror panel, try to lift rather than drag to reduce wear on the surface.
Measures to prevent oxidation
Environmental control
Keep dry: MS mirror panels are prone to oxidation (rust) due to humid environments. Therefore, try to place them in a well-ventilated and dry place.
Avoid contact with chemicals: Avoid contact between MS mirror panels and salt, acidic substances or other corrosive chemicals, which will accelerate the oxidation process.
Surface treatment
Coating protection: The corrosion resistance of MS mirror panels can be significantly improved through processes such as chrome plating, nickel plating or spraying anti-corrosion coatings.
Regular waxing: Apply a layer of metal-specific protective wax on the surface of the mirror panel to form a protective film to isolate moisture and oxygen in the air, thereby delaying oxidation.
Timely repair
Remove initial rust: If slight oxidation is found on the surface of the mirror panel, it should be gently polished with sandpaper in time and coated with anti-rust oil or protective wax.
Replace damaged areas: For severely oxidized or damaged parts, it is recommended to replace new materials to ensure overall beauty and performance.
Daily maintenance recommendations
Regular inspection
Regularly check the surface condition of the MS mirror panel to detect and deal with scratches or oxidation problems in time to prevent further deterioration.
Gentle operation
During transportation or installation, try to handle it with care and avoid severe impact or squeezing to avoid surface damage.
Professional maintenance
For MS mirror panels that are used for a long time, it is recommended to ask professionals to perform deep cleaning and maintenance regularly to ensure that they are always in good condition.

Precautions for special application scenarios
Outdoor use
If the MS mirror panel is used in an outdoor environment, additional protective measures must be taken, such as adding a waterproof coating or using stainless steel instead of ordinary steel to enhance weather resistance.
Kitchen or bathroom
In environments with high humidity (such as kitchens or bathrooms), special attention should be paid to ventilation and the surface should be cleaned regularly to avoid oxidation caused by residual water stains.
Industrial equipment
The MS mirror panels in industrial equipment may be exposed to chemicals or high temperature environments, so it is necessary to select high-performance materials that have been specially treated and regularly inspected and maintained.

In order to prevent the MS mirror panels from being scratched or oxidized, the key lies in daily use, cleaning and maintenance, and environmental control. By reasonably selecting surface protection measures, using appropriate cleaning tools and detergents, and performing regular maintenance, the service life of the MS mirror panels can be effectively extended and their aesthetics can be maintained. In addition, taking targeted protective measures for different application scenarios is also an important means to ensure its stable performance.