Acrylic light guide plate can help the delicate work of the factory to illuminate the work surface without dead corners, and can provide workers with all-round lighting and services. Acrylic light guide plate and ordinary light bulbs consume almost the same power, but can play a role with ordinary lighting. More powerful tools. So what are the precautions for using acrylic light guide plate? 1. Be careful not to cause surface abrasion when installing and moving
Because the surface hardness of the light guide plate is equivalent to aluminum, it is soft and easy to scratch. Therefore, when installing and placing the light guide plate, you should pay attention to the protection of the surface of the acrylic light guide plate. If you accidentally damage the surface of the light guide plate, or encounter the ground during the handling operation In the event of contact, you can use the abrasive for yellow aluminum to polish the damaged ground, which can easily restore the original beautiful and smooth surface.
2. Pay attention to the temperature stability of the installation environment
The light guide plate has the same expansion coefficient and thermal reactivity as ordinary plastic. When using a good service and after-sales acrylic light guide plate, the surface tension caused by temperature changes must be fully considered. Therefore, the indoor temperature should be maintained at the time of installation and storage of the acrylic light guide plate. The stable value of about 25 degrees is to prevent the deformation of the board surface caused by too high or low temperature, which affects the installation suitability of the acrylic light guide plate.
3. Pay attention to prevent dust from contaminating the board surface
It is recommended that purchasers install light guide plates in dust-free workshops of tens of thousands or above, and all staff must wear masks when using them to avoid saliva spraying into the acrylic light guide plate and the reflective sheet to create bright spots and block the line of sight. In order to protect the hands and the light guide plate, you must wear powder-free latex gloves when working to prevent the acrylic light guide plate from being stained with hand sweat and fingerprints to produce black and white spots and dark shadows.
The illuminating energy provided by the acrylic light guide plate for the factory is not provided by ordinary lighting tools. Choosing the acrylic light guide plate praised by the service not only needs to be careful not to cause surface wear during installation and movement, but also need to pay attention to the temperature stability of the installation environment to ensure the stability of the light guide plate surface, and also to prevent dust from contaminating the board surface.
Related Suggestion : Manufacturer Custom Golden Color Acrylic Wall Mirror